IT'S FINALLY WORKING!

Makefile

@@ -0,0 +1,33 @@
+USER	:= foo-dogsquared
+HOST	:= zilch
+HOME	:= /home/$(USER)
+DOTS	:= /etc/dotfiles
+
+NIXOS_VERSION	:= 20.03
+NIXOS_PREFIX	:= $(PREFIX)/etc/nixos
+FLAGS		:= -I "config=$$(pwd)/config" \
+		   -I "modules=$$(pwd)/modules" \
+		   -I "bin=$$(pwd)/bin" \
+		   $(FLAGS)
+
+config:	$(NIXOS_PREFIX)/configuration.nix
+home:	$(HOME)/dotfiles
+
+channels:
+	@sudo nix-channel --add "https://nixos.org/channels/nixos-unstable" nixos
+	@sudo nix-channel --add "https://github.com/rycee/home-manager/archive/master.tar.gz" home-manager
+
+update:
+	@sudo nix-channel --update
+
+switch:
+	@sudo nixos-rebuild $(FLAGS) switch
+
+install: channels update
+	@echo "import "$(DOTS)" \"$${HOST:-$$(hostname)}\" \"$${USER}\"" | sudo tee "${NIXOS_PREFIX}/configuration.nix"
+	@sudo nixos-install --root "$(PREFIX)" $(FLAGS)
+	@sudo rm -r "$(PREFIX)/etc/dotfiles" && sudo cp -r "$(DOTS)" "$(PREFIX)/etc/dotfiles"
+	@sudo nixos-enter --root "$(PREFIX)" -c chown $(USER):users $(DOTS)
+
+upgrade: update switch
+

README.adoc

@@ -1,26 +1,50 @@
 = foo-dogsquared's NixOS config
 
 This is the configuration setup for my https://nixos.org[NixOS] instance.
-A major part of this setup is inspired (or stolen, whichever you prefer) from https://github.com/hlissner/dotfiles[hlissner's NixOS config].
+This setup is stolen from https://github.com/hlissner/dotfiles[hlissner's NixOS config] foot:[The author and one-man maintainer of Doom Emacs.].
-The difference is https://github.com/rycee/home-manager[home-manager] is a big requirement and uses it a whole lot.
+The whole setup is mostly intended for single-user systems but you can easily configure it for multi-user systems.
 
 
 
 
 == Getting started
 
-Before installing this setup, be sure to install NixOS and logged in as a user.
+You can replace your NixOS configuration with this bad boi.
-This project setup also assumes the operating system has the following configurations:
+
+To install, you have to do the following first:
+
+- Set up your partitions.
+- Copy this setup (either with `git` or what-have-you) to `/etc/dotfiles`.
+- Install GNU Make.
+
+Then simply run `make install`.
+The default behavior of the installation installs my default setup.
+It is equivalent to the following command:
+
+[source, shell]
+----
+PREFIX=/mnt USER=foo-dogsquared HOST=zilch make --directory /etc/dotfiles install
+----
+
+For more information, simply inspect the Makefile.
+
+Assuming you did install, your project will have the following stuff.
 
 - Uses the nixpkgs unstable channel as `nixos` (i.e., `nix-channels --update https://nixos.org/channels/nixos-unstable`).
 - Have the https://github.com/rycee/home-manager[home-manager] installed with the unstable release.
 - You start with the TTY and nothing else is installed (i.e., bare installation similar in spirit to Arch Linux).
 
-[source, shell]
+
-----
+=== Precautions
-git clone <GIT_URL_OF_THIS_REPO>
+
-make
+There are some things you need to keep in mind when using this setup.
-----
+
+* This setup is not meant to be fully reproducible.
+It is a personal setup for a person who wants to live on the bleeding edge, personally.
+Despite being a NixOS setup which should be reproducible on paper, it mainly uses the unstable versions of the channels and packages.
+If we're to install this setup at separate times, the full list of installed packages with their depedencies and versions wouldn't be the same.
+
+* It may use third-party channels for certain versions of the packages, hammering the first precaution even further regarding reproducibility.
 
 
 
@@ -33,18 +57,73 @@ The project structure should look like the following:
 ----
 nixos-config
 ├── config/
-├── home.nix
+├── hosts/
 ├── modules/
-└── README.adoc
+├── packages/
+├── default.nix*
+├── Makefile*
+└── README.adoc*
 ----
 
 * The directory paid with the most attention would most likely be the `modules/` folder.
 Each module (and submodule) can contain multiple modules for multiple programs (i.e., `modules/shell/git`, `modules/desktop/bspwm`).
-It could also contain a `base.nix` file where Nix packages with no configurations are placed similar to Arch package groups (i.e., `base`, `base-devel`, `xfce`).
+It could also contain a `base.nix` file where Nix packages with no configurations are placed similar to Arch package groups.
 
 ** Another folder worthy of attention is the `modules/themes` which sets up a complete desktop environment for you so you don't have to.
-For safety, you should have a bare installation ala-Arch Linux.
+For more information, see the <<Themes>> section.
 
 * The `config/` directory is simply the ad hoc configuration of several programs.
 In this case, it is my https://github.com/foo-dogsquared/dotflies[dotfiles] directory.
 
+* The `hosts/` contains the individual system configuration of my machine (I've only one but I plan to NixOS for my new ones).
+Each folder inside of this directory represents one machine.
+It is also used on the installation phase (from `make install`) by setting the `HOST` variable (i.e., `HOST=zilch make -C /etc/install`) with the folder name as the argument.  
+
+* The `packages/` folder is my custom packages either the new ones that haven't made into nixpkgs yet or packages with overrides.
+Also contains third-party package repositories and overlays such as the NUR or the unstable branch of Emacs.
+
+
+
+
+== Themes
+
+My setup feature themes as a NixOS modules (in link:./modules/themes[`modules/themes`]) which sets up a complete graphical environment.
+This lets me easily switch my graphical setup with a simple toggle (i.e., `theme.$THEME_NAME.enable = true;`).
+For safety, you should have a bare installation ala-Arch Linux.
+
+As you can see in the `default.nix` of the `modules/theme` directory, a theme should also pass in certain data to `modules.theme` as if it's enabled.
+The following is an example metadata object of a theme.
+
+[source, nix]
+----
+{
+  name = "Fair and square";
+  version = "0.1.0";
+  path = ./.;
+  wallpaper = "${config.modules.theme.path}/config/wallpaper";
+}
+----
+
+For best practice, the general project structure of a theme should look like the following:
+
+[source, tree]
+----
+$THEME_NAME
+├── config/
+│   ├── PROGRAM_1/
+│   ├── PROGRAM_2/
+│   ├── PROGRAM_3/
+│   └── wallpaper*
+├── default.nix*
+└── README.adoc*
+----
+
+* The `config/` folder is where all of the specific configurations will go.
+Each program to be configured is stored in its own folder (i.e., polybar, bspwm, sxhkd).
+A wallpaper can be placed at `config/wallpaper` for convenience.
+
+* `default.nix` is simply the entry point for our theme module.
+This is where you can add certain packages, enable certain settings, setup your files to the home directory, and pass the theme metadata.
+
+* For convenience, you should make the NixOS theme module as a https://github.com/cookiecutter/cookiecutter[Cookiecutter template] to easily replace the color schemes, fonts, and what-have-you.
+

default.nix

@@ -0,0 +1,69 @@
+# Author:  Henrik Lissner <henrik@lissner.net>
+# Modified by: Gabriel Arazas <foo.dogsquared@gmail.com>
+# URL:     https://github.com/foo-dogsquared/nixos-config
+# License: MIT
+#
+# This is ground zero, where the absolute essentials go, to be present on all systems I use nixos on.
+# Most of which are single user systems (the ones that aren't are configured from their hosts/*/default.nix).
+
+device: username:
+{ pkgs, options, lib, config, ... }:
+{
+  networking.hostName = lib.mkDefault device;
+  my.username = username;
+
+  imports = [
+    ./modules
+    "${./hosts}/${device}"
+  ] ++ (if builtins.pathExists(/etc/nixos/cachix.nix) then [
+    /etc/nixos/cachix.nix
+  ] else []) ++ (if builtins.pathExists(/etc/nixos/hardware-configuration.nix) then [
+    /etc/nixos/hardware-configuration.nix
+  ] else []);
+
+  ### NixOS
+  nix.autoOptimiseStore = true;
+  nix.nixPath = options.nix.nixPath.default ++ [
+    # So we can use absolute import paths
+    "bin=/etc/dotfiles/config/bin"
+    "config=/etc/dotfiles/config"
+  ];
+
+  # Add custom packages & unstable channel, so they can be accessed via pkgs.*
+  nixpkgs.overlays = import ./packages;
+  nixpkgs.config.allowUnfree = true;  # forgive me Stallman senpai
+
+  # These are the things I want installed on all my systems
+  environment.systemPackages = with pkgs; [
+    # Just the bear necessities~
+    coreutils
+    exfat
+    git
+    hfsprogs
+    killall
+    ntfs3g
+    sshfs
+    udiskie 
+    unzip
+    vim
+    wget
+
+    gnumake               # for our own makefile
+    cachix                # less time buildin' mo time nixin'
+  ];
+
+  # Default settings for primary user account. `my` is defined in
+  # modules/default.nix
+  my.user = {
+    isNormalUser = true;
+    uid = 1000;
+    extraGroups = [ "wheel" "video" "networkmanager" "libvirtd" ];
+    shell = pkgs.zsh;
+  };
+
+  # This value determines the NixOS release with which your system is to be
+  # compatible, in order to avoid breaking some software such as database
+  # servers. You should change this only after NixOS release notes say you
+  # should.
+  system.stateVersion = "20.03"; # Did you read the comment?
+}

home.nix

@@ -1,70 +0,0 @@
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ./modules
-  ];
-
-  nixpkgs.config = {
-    allowUnfree = true;
-  };
-
-  # Let Home Manager install and manage itself.
-  programs.home-manager.enable = true;
-
-  # Module configurations.
-  modules = {
-    desktop = {
-      files.enable = true;
-    };
-
-    dev = {
-      base.enable = true;
-      cc.enable = true;
-      documentation.enable = true;
-      rust.enable = true;
-    };
-
-    editors = {
-      default = "nvim";
-      emacs.enable = true;
-      neovim.enable = true;
-    };
-
-    shell = {
-      base.enable = true;
-      lf.enable = true;
-      git = {
-        enable = true;
-        config = {
-          userName = "Gabriel Arazas";
-          userEmail = "foo.dogsquared@gmail.com";
-        };
-      };
-      zsh.enable = true;
-    };
-  };
-
-  programs.git = {
-  };
-
-  # Additional programs that doesn't need much configuration (or at least personally configured).
-  # It is pointless to create modules for it, anyways.
-  # home.packages = with pkgs; [
-  #   cookiecutter    # A generic project scaffolding tool.
-  # ];
-
-  # Home Manager needs a bit of information about you and the paths it should manage.
-  home.username = "foo-dogsquared";
-  home.homeDirectory = "/home/foo-dogsquared";
-
-  # This value determines the Home Manager release that your
-  # configuration is compatible with. This helps avoid breakage
-  # when a new Home Manager release introduces backwards
-  # incompatible changes.
-  #
-  # You can update Home Manager without changing this value. See
-  # the Home Manager release notes for a list of state version
-  # changes in each release.
-  home.stateVersion = "20.09";
-}

hosts/zilch/config/recoll/recoll.conf

@@ -0,0 +1,28 @@
+# My desktop search settings.
+
+# The main directories to create an index.
+topdirs = ~/writings    # My writings on stuff.
+          ~/projects    # My projects on stuff.
+          ~/library     # Personal library which contains my references, documents, and movies.
+          ~/Documents   # The ol' hangout for gamesaves.
+          ~/Videos      # XDG Video directory.
+          ~/Pictures    # Muh screenshots.
+
+# A list of wildcards to be ignored during index scanning.
+skippedNames = #* CVS  Cache cache* .cache caughtspam tmp \
+     .thumbnails .svn \
+     *~ .beagle .git .hg .bzr loop.ps .xsession-errors \
+     .recoll* xapiandb recollrc recoll.conf
+
+noContentSuffixes = .md5 .map \
+       .o .lib .dll .a .sys .exe .com \
+       .mpp .mpt .vsd \
+       .img .img.gz .img.bz2 .img.xz .image .image.gz .image.bz2 .image.xz \
+       .dat .bak .rdf .log.gz .log .db .msf .pid \
+       ,v ~ #
+
+skippedPaths = /media
+indexallfilenames = 1
+usesystemfilecommand = 1
+systemfilecommand = xdg-mime query filetype
+

hosts/zilch/config/unison/default.prf

@@ -0,0 +1,24 @@
+# Paths to synchronize 
+path = writings
+path = projects
+path = library
+
+# My GnuPG keys
+path = .gnupg
+
+# The password store of gopass
+path = .password-store
+
+# Some regexps specifying names and paths to ignore
+ignore = Name temp.*
+ignore = Name *~
+ignore = Name .*~
+ignore = Name *.o
+ignore = Name *.tmp
+
+# Use this command for displaying diffs
+diff = diff -y -W 79 --suppress-common-lines
+
+# Log actions to the terminal
+log = true
+

hosts/zilch/default.nix

@@ -0,0 +1,188 @@
+{ config, pkgs, lib, ... }:
+
+{
+  imports = [
+    ./hardware-configuration.nix
+  ];
+
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "nixos"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
+  # Per-interface useDHCP will be mandatory in the future, so this generated config
+  # replicates the default behaviour.
+  networking.useDHCP = false;
+  networking.interfaces.enp4s0.useDHCP = true;
+
+  # Enable XDG conventions.
+  my.home.xdg.enable = true;
+  environment.variables = {
+    XDG_CONFIG_HOME = "$HOME/.config";
+    XDG_CACHE_HOME  = "$HOME/.cache";
+    XDG_DATA_HOME   = "$HOME/.local/share";
+    XDG_BIN_HOME    = "$HOME/.local/bin";
+  };
+
+  # Install documentations for tools and whatnot.
+  documentation = {
+    enable = true;
+    dev.enable = true;
+    man.enable = true;
+  };
+
+  # Enable virutialization.
+  virtualisation = {
+    docker = {
+      enable = true;
+    };
+
+    libvirtd = {
+      enable = true;
+    };
+  };
+
+  # Module configurations.
+  modules = {
+    desktop = {
+      browsers = {
+        brave.enable = true;
+        firefox.enable = true;
+      };
+      fonts.enable = true;
+      files.enable = true;
+      graphics = {
+        raster.enable = true;
+        vector.enable = true;
+        _3d.enable = true;
+      };
+      multimedia.enable = true;
+      music = {
+        composition.enable = true;
+        production.enable = true;
+      };
+    };
+
+    dev = {
+      android.enable = true;
+      base.enable = true;
+      documentation = {
+        enable = true;
+        latex.enable = true;
+      };
+      java.enable = true;
+      javascript = {
+        deno.enable = true;
+        node.enable = true;
+      };
+      lisp = {
+        guile.enable = true;
+        racket.enable = true;
+      };
+      rust.enable = true;
+    };
+
+    editors = {
+      default = "nvim";
+      emacs.enable = true;
+      neovim.enable = true;
+    };
+
+    services = {
+      recoll.enable = true;
+      unison.enable = true;
+    };
+
+    shell = {
+      base.enable = true;
+      git.enable = true;
+      lf.enable = true;
+      zsh.enable = true;
+    };
+
+    themes.fair-and-square.enable = true;
+  };
+
+  # Additional programs that doesn't need much configuration (or at least personally configured).
+  # It is pointless to create modules for it, anyways.
+  environment.systemPackages = with pkgs; [
+    # defold
+    nim         # Jack the nimble, jack jumped over the nightstick, and got over not being the best pick.
+    python      # *insert Monty Python quote here*
+
+    # Muh games.
+    zeroad
+    wesnoth
+  ];
+
+  my.env = {
+    BROWSER = "firefox";
+    FILE = "lf";
+    READ = "zathura";
+    SUDO_ASKPASS = <config/bin/askpass>;
+  };
+  my.alias.dots = "USER=${config.my.username} make -C /etc/install";
+
+  # Set your time zone.
+  time.timeZone = "Asia/Manila";
+  services.openssh.enable = true;
+  services.lorri.enable = true;
+  programs.gnupg.agent = {
+    enable = true;
+    enableSSHSupport = true;
+    pinentryFlavor = "gnome3";
+  };
+
+  # Enable sound.
+  sound.enable = true;
+  hardware.pulseaudio.enable = true;
+
+  my.home.programs = {
+    # My personal Git config.
+    git = {
+      enable = true;
+
+      # Enable the syntax highlighter with Delta.
+      # https://github.com/dandavison/delta
+      delta.enable = true;
+
+      # Enable Large File Storage.
+      lfs.enable = true;
+
+      # Use the entire suite.
+      package = pkgs.gitAndTools.gitFull;
+
+      userName = "Gabriel Arazas";
+      userEmail = "${config.my.email}";
+    };
+  };
+
+  my.home.services = {
+    # Unison backup strat.
+    unison = {
+      enable = true;
+
+      pairs.mainbackup = 
+        let
+          homeDirectory = "/home/${config.my.username}";
+          backupDrive = "/run/media/${config.my.username}/Seagate Backup Plus Drive";
+        in {
+        roots = [
+          homeDirectory
+          backupDrive
+        ];
+        commandOptions = {
+          # Unison may delete the entire stuff so indicate that the other is a mount point.
+          mountpoint = backupDrive;
+          force = homeDirectory;
+
+          # My GnuPG keys.
+          path = ".gnupg .password-store";
+        };
+      };
+    };
+  };
+}

hosts/zilch/hardware-configuration.nix

@@ -0,0 +1,31 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ <nixpkgs/nixos/modules/installer/scan/not-detected.nix>
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "ohci_pci" "ehci_pci" "usb_storage" "uas" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/5a99c954-92ae-4368-af6d-3e4b1d464474";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/F3B1-E4AC";
+      fsType = "vfat";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/4b2a4a00-f705-45b9-a014-e60acce2ae2a"; }
+    ];
+
+  nix.maxJobs = lib.mkDefault 2;
+}

modules/default.nix

@@ -1,10 +1,96 @@
-{ config, options, lib, pkgs, ... }:
+{ config, options, lib, ... }:
-
+with lib;
-{
+let mkOptionStr = value: mkOption
+  { type = types.str;
+    default = value; };
+in {
   imports = [
+    <home-manager/nixos>
+
     ./desktop
     ./dev
     ./editors
     ./shell
+    ./services
+    ./themes
   ];
+
+  options = {
+    my = {
+      # Personal details
+      username = mkOptionStr "foo-dogsquared";
+      email = mkOptionStr "foo.dogsquared@gmail.com";
+
+      # Convenience aliases
+      home = mkOption { type = options.home-manager.users.type.functor.wrapped; };
+      user = mkOption { type = types.submodule; };
+      packages = mkOption { type = with types; listOf package; };
+
+      # Environment
+      env = mkOption {
+        type = with types; attrsOf (either (either str path) (listOf (either str path)));
+        apply = mapAttrs
+          (n: v: if isList v
+                 then concatMapStringsSep ":" (x: toString x) v
+                 else (toString v));
+      };
+
+      alias = mkOption {
+        type = with types; nullOr (attrsOf (nullOr (either str path)));
+      };
+
+      zsh = {
+        rc = mkOption {
+          type = types.lines;
+          default = "";
+          description = ''
+            Zsh lines to be written to $XDG_CONFIG_HOME/zsh/extra.zshrc and
+            sourced by $XDG_CONFIG_HOME/zsh/.zshrc
+          '';
+        };
+        env = mkOption {
+          type = types.lines;
+          default = "";
+          description = ''
+            Zsh lines to be written to $XDG_CONFIG_HOME/zsh/extra.zshenv and
+            sourced by $XDG_CONFIG_HOME/zsh/.zshenv
+          '';
+        };
+      };
+    };
+  };
+
+  config = {
+    # Convenience aliases
+    home-manager.users.${config.my.username} = mkAliasDefinitions options.my.home;
+    users.users.${config.my.username} = mkAliasDefinitions options.my.user;
+    my.user.packages = config.my.packages;
+
+    # PATH should always start with its old value
+    my.env.PATH = [ <config/bin> "$PATH" ];
+
+    # Put the configured custom environment variables (config.my.env) into initialization phase.
+    environment.extraInit = 
+      let exportLines = mapAttrsToList (key: value: "export ${key}=\"${value}\"") config.my.env;
+      in ''
+      export XAUTHORITY=/tmp/XAUTHORITY
+      [ -e ~/.Xauthority ] && mv -f ~/.Xauthority "$XAUTHORITY"
+
+       ${concatStringsSep "\n" exportLines}
+      '';
+
+    my.home.xdg.configFile = {
+      "zsh/extra.zshrc".text =
+        let aliasLines = mapAttrsToList (key: value: "alias ${key}=\"${value}\"") config.my.alias;
+        in ''
+          # This file is autogenerated, do not edit it!
+          ${concatStringsSep "\n" aliasLines}
+          ${config.my.zsh.rc}
+        '';
+      "zsh/extra.zshenv".text = ''
+        # This file is autogenerated, please do not edit it!
+        ${config.my.zsh.env}
+      '';
+    };
+  };
 }

modules/desktop/browsers.nix

@@ -0,0 +1,28 @@
+# My browsers are my buddies on surfing the web.
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.modules.desktop.browsers;
+in
+{
+  options.modules.desktop.browsers =
+    let mkBoolDefault = bool: mkOption {
+      type = types.bool;
+      default = false;
+    }; in {
+      brave.enable = mkBoolDefault false;
+      firefox.enable = mkBoolDefault false;
+      chromium.enable = mkBoolDefault false;
+      nyxt.enable = mkBoolDefault false;
+  };
+
+  config = {
+    my.packages = with pkgs;
+      (if cfg.brave.enable then [ brave ] else []) ++
+      (if cfg.firefox.enable then [ firefox-bin ] else []) ++
+      (if cfg.chromium.enable then [ chromium ] else []) ++
+      (if cfg.nyxt.enable then [ next ] else []);
+  };
+}

modules/desktop/default.nix

@@ -3,9 +3,11 @@
 
 {
   imports = [
+    ./browsers.nix
     ./files.nix
     ./fonts.nix
     ./graphics.nix
+    ./multimedia.nix
     ./music.nix
   ];
 }

modules/desktop/files.nix

@@ -14,15 +14,26 @@ in {
   };
 
   config = mkIf cfg.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
-      exfat                 # A filesystem usually found on external hard drives.
       exiftool              # A file metadata reader/writer/manager/helicopter.
-      hfsprogs              # Some programs for HFS/NFS-based filesystems.
+      (recoll.override {
-      ntfs3g                # A filesystem for Windows-based systems.
+        withGui = false;
+      })                    # Bring the search engine to the desktop!
+      (unison.override {
+        enableX11 = false;
+      })                    # Bridge the gap between your storage.
+      magic-wormhole        # Magically transfer stuff between your wormholes!
+      transmission          # One of the components for sailing the high seas.
       syncthing             # A peer-to-peer synchro summoning.
       xfce.thunar           # A graphical file manager.
       xfce.thunar-volman    # A Thunar plugin on volume management for external devices.
       udiskie               # An automounter for external devices with authentication.
     ];
+
+    # Clean 'yer home!
+    my.env = {
+      RECOLL_CONFDIR = "$XDG_DATA_HOME/recoll";
+      UNISON = "$XDG_DATA_HOME/unison";
+    };
   };
 }

modules/desktop/fonts.nix

@@ -11,12 +11,25 @@ with lib;
   };
 
   config = mkIf config.modules.desktop.fonts.enable {
-    home.packages = with pkgs; [
+    # Enable fontconfig to easily discover fonts installed from home-manager.
-      fira-code             # The programming font with fancy symbols.
+    fonts = {
-      ibm-plex              # IBM's face.
+      enableFontDir = true;
-      noto-fonts            # It's all about family and that's what so powerful about it.
+      enableGhostscriptFonts = true;
-      noto-fonts-cjk        # The universal font, Japanese-Chinese-Korean version.
+      fontconfig.enable = true;
-      stix-otf              # The font you need for them math moonrunes.
+
-    ];
+      fonts = with pkgs; [
+       fira-code             # The programming font with fancy symbols.
+       ibm-plex              # IBM's face, is it professional?
+       iosevka               # The fancy monofont with fancy ligatures.
+       jetbrains-mono        # Jet to the face, land on the brains.
+       latinmodern-math      # The ol' mathematical typeface.
+       noto-fonts            # It's all about family and that's what so powerful about it.
+       noto-fonts-cjk        # I don't condone anime.
+       source-code-pro       # The Adobe pro code.
+       source-serif-pro      # The Adobe serif code.
+       source-sans-pro       # The above descriptions doesn't make much sense.
+       stix-otf              # The font you need for them math moonrunes.
+      ];
+    };
   };
 }

modules/desktop/graphics.nix

@@ -12,14 +12,13 @@ in {
       type = types.bool;
       default = bool;
     }; in {
-      enable = mkBoolDefault false;
       raster.enable = mkBoolDefault false;
       vector.enable = mkBoolDefault false;
       _3d.enable = mkBoolDefault false;
     };
 
-  config = mkIf cfg.enable {
+  config = {
-    home.packages = with pkgs;
+    my.packages = with pkgs;
       [
         font-manager    # Self-explanatory name is self-explanatory.
         imagemagick     # A command-line tool for manipulating images.
@@ -28,7 +27,7 @@ in {
       (if cfg.raster.enable then [
         gimp            # Adobe Photoshop replacement.
         krita           # A good painting program useful for "pure" digital arts.
-        aseprite        # A pixel art editor.
+        aseprite-unfree        # A pixel art editor.
       ] else []) ++
 
       (if cfg.vector.enable then [

modules/desktop/multimedia.nix

@@ -0,0 +1,23 @@
+# Muh consumer applications...
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+{
+  options.modules.desktop.multimedia = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+    };
+  };
+
+  config = mkIf config.modules.desktop.multimedia.enable {
+    my.packages = with pkgs; [
+      hexchat           # The ultimate IRC client for neckbeards.
+      mpv               # The ultimate media player for hipsters.
+      newsboat          # The ultimate RSS aggregator for some person.
+      openshot-qt       # A decent video editor.
+      thunderbird       # The ultimate email client for dumbasses like me.
+      zathura           # The ultimate PDF viewer for run-of-the-mill ricing.
+    ];
+  };
+}

modules/desktop/music.nix

@@ -11,14 +11,14 @@ in {
       type = types.bool;
       default = bool;
     }; in {
-      enable = mkBoolDefault false;
+      composition.enable = mkBoolDefault false;
-      composition = mkBoolDefault false;
+      production.enable = mkBoolDefault false;
-      production = mkBoolDefault false;
     };
 
-  config = mkIf cfg.enable {
+  config = {
-    home.packages = with pkgs;
+    my.packages = with pkgs;
       (if cfg.composition.enable then [
+        lilypond            # Prevent your compositions to be forever lost when you're in grave by engraving them now (or whenever you feel like it).
         musescore           # A music composer for creating musical cheatsheets.
         soundfont-fluid     # A soundfont for it or something.
         supercollider       # Programming platform for synthesizing them 'zics.
@@ -26,8 +26,13 @@ in {
 
       (if cfg.production.enable then [
         ardour      # A DAW focuses on hardware recording but it can be used for something else.
+        audacity    # Belongs in the great city of "Simple tools for short audio samples".
         carla       # A plugin host useful for a consistent hub for them soundfonts and SFZs.
+        fluidsynth  # Synth for fluid sounds.
         helm        # A great synthesizer plugin.
+        hydrogen    # Them drum beats composition will get good.
+        polyphone   # Edit your fonts for sound.
+        zynaddsubfx # Ze most advanced synthesizer I've seen so far (aside from the upcoming Vital syntehsizer).
 
         # As of 2020-07-03, lmms has some trouble regarding Qt or something so at least use the "unstable" channel just to be safe.
         # lmms

modules/dev/android.nix

@@ -0,0 +1,24 @@
+# Android is the mobile version of Linux.
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+{
+  options.modules.dev.android = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+    };
+  };
+
+  config = mkIf config.modules.dev.android.enable {
+    my.packages = with pkgs; [
+      android-studio        # The apartment for Android development.
+      dart                  # It's JavaScript except saner and slimmer.
+      flutter               # It's Electron except saner and slimmer.
+      kotlin                # It's Java except saner and slimmer.
+    ];
+
+    # Enable Android Debug Bridge for some device debugging.
+    programs.adb.enable = true;
+  };
+}

modules/dev/base.nix

@@ -11,9 +11,12 @@ with lib;
   };
 
   config = mkIf config.modules.dev.base.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
+      caddy2            # THE ULTIMATE HTTPS/2 SERVER FOR 'YER GOLFIN' SESSIONS!!!
       cookiecutter      # A project scaffolding tool.
+      direnv            # Augment your shell with automatic environment variables loading and unloading.
       gnumake           # Make your life easier with GNU Make.
+      tldr		# What manuals should include.
       universal-ctags   # Enable fast traveling to your code (assuming written in a supported language).
     ];
   };

modules/dev/cc.nix

@@ -11,7 +11,7 @@ with lib;
   };
 
   config = mkIf config.modules.dev.cc.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
       cmake     # Yo dawg, I heard you like Make.
       # clang     # A C compiler frontend for LLVM.
       gcc       # A compiler toolchain.

modules/dev/default.nix

@@ -2,12 +2,15 @@
 
 {
   imports = [
+    ./android.nix
     ./base.nix
     ./cc.nix
     ./documentation.nix
     ./gamedev.nix
+    ./java.nix
     ./javascript.nix
     ./lisp.nix
+    ./math.nix
     ./rust.nix
   ];
 }

modules/dev/documentation.nix

@@ -16,21 +16,35 @@ in
     }; in {
     enable = mkBoolOption false;
 
+    # Jupyter does need a bit of setup so separate option.
+    jupyter.enable = mkBoolOption false;
+
     # Since my usual LaTeX needs are somewhat big, I'm keeping it as a separate option.
     latex.enable = mkBoolOption false;
   };
 
   config = mkIf cfg.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
-      asciidoctor       # Keeping Asciidoc alive with the improved version.
+      asciidoctor       # An Asciidoctor document keeps a handful of few frustrated users a day.
+      aspell            # The not-opinionated spell checker.
+      aspellDicts.en
+      aspellDicts.en-computers
+      aspellDicts.en-science
       hugo              # An SSG for your DDD (documentation-driven development) workflow.
+      languagetool      # A grammar checker with a HUGE data set.
       pandoc            # The Swiss army knife for document conversion.
+      vale              # The customizable linter for your intended writings.
 
       # TODO: Make Neuron its own package.
       (let neuronSrc = builtins.fetchTarball "https://github.com/srid/neuron/archive/master.tar.gz";
         in import neuronSrc {})     # Neurons and zettels are good for the brain.
     ] ++
 
+    (if cfg.jupyter.enable then [
+      jupyter           # The interactive notebook.
+      iruby             # The Ruby kernel for Jupyter.
+    ] else []) ++
+
     (if cfg.latex.enable then [
       texlive.combined.scheme-medium       # The all-in-one LaTeX distribution for your offline typesetting needs.
     ] else []);

modules/dev/gamedev.nix

@@ -18,14 +18,14 @@ in
     };
 
   config = {
-    home.packages = with pkgs;
+    my.packages = with pkgs;
       (if cfg.godot.enable then [
         godot       # The Godot, not to be confused with a certain prosecutor.
       ] else []) ++
 
       (if cfg.unity3d.enable then [
-        unity3d
+        unity3d     # The Unity, not to be confused with a certain ideal.
-        unityhub
+        unityhub    # The ideal hub for your Unity projects.
       ] else []);
   };
 }

modules/dev/java.nix

@@ -12,7 +12,7 @@ with lib;
   };
 
   config = mkIf config.modules.dev.java.enable {
-    home.packages = [
+    my.packages = with pkgs; [
       jdk       # The Java Development Kit.
       jre       # The Java Runtime Environment for running Java apps.
     ];

modules/dev/javascript.nix

@@ -19,13 +19,13 @@ in
   };
 
   config = {
-    home.packages = with pkgs;
+    my.packages = with pkgs;
       (if cfg.deno.enable then [
         deno        # The Deltarune of Node.
       ] else []) ++
 
       (if cfg.node.enable then [
-        node        # The JavaScript framework/runtime where you don't have to kill. :)
+        nodejs      # The JavaScript framework/runtime where you don't have to kill someone for bad code. :)
       ] else []);
   };
 }

modules/dev/lisp.nix

@@ -20,7 +20,7 @@ in
   };
 
   config = {
-    home.packages = with pkgs;
+    my.packages = with pkgs;
       (if cfg.clojure.enable then [
         clojure     # Improved Java version.
       ] else []) ++

modules/dev/math.nix

@@ -0,0 +1,34 @@
+# Eh... I don't really do math but hey, I occasionally create visual aids sometimes.
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.modules.dev.math;
+in
+{
+  options.modules.dev.math =
+    let mkEnableOption = mkOption {
+      type = types.bool;
+      default = false;
+    }; in {
+      python.enable = mkEnableOption;
+      r.enable = mkEnableOption;
+  };
+
+  config = {
+    my.packages = with pkgs; [
+      gnuplot       # I came for the plots.
+      octave        # Matlab's hipster brother.
+    ] ++
+
+    (if cfg.python.enable then [
+      python        # Serious question: do I really need to install this?
+      python38Packages.sympy        # The Python library that always being noticed.
+    ] else []) ++
+
+    (if cfg.r.enable then [
+      R             # Rated G for accessibility.
+    ] else []);
+  };
+}

modules/dev/rust.nix

@@ -12,13 +12,13 @@ with lib;
   };
 
   config = mkIf config.modules.dev.rust.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
       rustup
     ];
 
-    programs.zsh.sessionVariables = mkIf config.modules.shell.zsh.enable {
+    my.env = {
-      CARGO_HOME = "${config.xdg.dataHome}/cargo";
+      CARGO_HOME = "$XDG_DATA_HOME/cargo";
-      RUSTUP_HOME = "${config.xdg.dataHome}/rustup";
+      RUSTUP_HOME = "$XDG_DATA_HOME/rustup";
       PATH = [ "$CARGO_HOME/bin" ];
     };
   };

modules/editors/default.nix

@@ -8,7 +8,6 @@ with lib;
   imports = [
     ./emacs.nix
     ./neovim.nix
-    ./vscode.nix
   ];
 
   options.modules.editors = {
@@ -17,4 +16,8 @@ with lib;
       default = "vim";
     };
   };
+
+  config = {
+    my.env.EDITOR = config.modules.editors.default;
+  };
 }

modules/editors/emacs.nix

@@ -11,10 +11,20 @@ with lib;
       type = types.bool;
       default = false;
     };
+
+    # Just make sure the unstable version of Emacs is available as a package by creating an overlay.
+    pkg = mkOption {
+      type = types.package;
+      default = pkgs.emacsUnstable;
+    };
   };
 
   config = mkIf config.modules.editors.emacs.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
+      ((emacsPackagesNgGen config.modules.editors.emacs.pkg).emacsWithPackages (epkgs: [
+        epkgs.vterm
+      ]))
+
       # Doom dependencies
       git
       (ripgrep.override { withPCRE2 = true; })
@@ -42,21 +52,14 @@ with lib;
 
       ## :tools lookup & :lang org+roam
       sqlite
-    ] ++
+    ];
-
-    ## :lang javascript
-    (if config.modules.dev.javascript.node.enable then [
-      nodePackages.javascript-typescript-langserver     # The LSP for JS/TS.
-    ] else []) ++
-
-    ## :lang cc
-    (if config.modules.dev.cc.enable then [
-      ccls
-    ] else []);
 
+    fonts.fonts = with pkgs; [
+      emacs-all-the-icons-fonts
+    ];
 
     # Placing the Doom Emacs config.
-    xdg.configFile."doom" = {
+    my.home.xdg.configFile."doom" = {
       source = ../../config/emacs;
       recursive = true;
     };

modules/editors/neovim.nix

@@ -12,21 +12,21 @@ with lib;
   };
 
   config = mkIf config.modules.editors.neovim.enable { 
-    home = {
+    my.packages = with pkgs; [
-      packages = with pkgs; [
         editorconfig-core-c     # Editorconfig is a MUST, you feel me?!
       ];
-    };
 
-    programs.neovim = {
+    my.home = {
-      enable = true;
+      programs.neovim = {
-      withPython3 = true;
+        enable = true;
-      withRuby = true;
+        withPython3 = true;
-    };
+        withRuby = true;
+      };
 
-    xdg.configFile."nvim" = {
+      xdg.configFile."nvim" = {
-      source = ../../config/nvim;
+        source = ../../config/nvim;
-      recursive = true;
+        recursive = true;
+      };
     };
   };
 }

modules/editors/vscode.nix

@@ -1,42 +0,0 @@
-# Visual Studio Code is the middle ground between a text editor and an IDE.
-# Perfect for managing medium-sized software projects.
-{ config, options, lib, pkgs, ... }:
-
-with lib;
-let
-  cfg = config.modules.editors.vscode;
-in {
-  options.modules.editors.vscode = {
-    enable = mkOption {
-      type = types.bool;
-      default = false;
-    };
-  };
-
-  # I'll be using the home-manager module for this one since it already did the work for me.
-  # If I were to create one from scratch, it'll most likely end up similar anyways.
-  config = mkIf cfg.enable { 
-    programs.vscode = {
-      enable = true;
-      extensions = with pkgs.vscode-extensions; [
-        # Material Icon theme
-        PKief.material-icon-theme
-
-        # Material theme that comes with multiple variants
-        Equinusocio.vsc-material-theme
-
-        # The official implementation for the Nord color scheme
-        arcticicestudio.nord-visual-studio-code
-
-        # ESLint
-        dbaeumer.vscode-eslint
-
-        # Supercharged Git integration into the editor
-        eamodio.gitlens
-
-        # A code formatter
-        esbenp.prettier-vscode
-      ];
-    };
-  };
-}

modules/services/default.nix

@@ -0,0 +1,10 @@
+# Seeing systemd as a great software is my guilty pleasure.
+# Here's where services are declared.
+{ config, options, lib, pkgs, ... }:
+
+{
+  imports = [
+    ./recoll.nix
+    ./unison.nix
+  ];
+}

modules/services/recoll.nix

@@ -0,0 +1,60 @@
+# When enabled, this will create a systemd service that creates a periodical Recoll index.
+# For customization, you should write the config file at "$XDG_CONFIG_HOME/recoll".
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.modules.services.recoll;
+in
+{
+  options.modules.services.recoll = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+    };
+
+    flags = mkOption {
+      type = types.str;
+      default = "";
+    };
+  };
+
+  config = mkIf cfg.enable {
+    my.home = {
+      systemd.user.services.recoll = {
+        Unit = {
+          Description = "Recoll periodic index update";
+          Documentation = [ "man:recollindex.1" "https://www.lesbonscomptes.com/recoll/pages/documentation.html" ];
+        };
+
+        Service = {
+          Environment = [ "RECOLL_CONFDIR=\"$XDG_DATA_HOME/recoll\"" ];
+          ExecStart = "${(pkgs.recoll.override { withGui = false; })}/bin/recollindex ${cfg.flags}";
+          Restart = "on-failure";
+        };
+
+        Install = {
+          WantedBy = [ "default.target" ];
+        };
+      };
+
+      # Make the service run every 4 hours (and still activate if it misses the interval).
+      systemd.user.timers.recoll = {
+        Unit = {
+          Description = "Recoll periodic index update";
+          Documentation = [ "man:recollindex.1" "https://www.lesbonscomptes.com/recoll/pages/documentation.html" ];
+        };
+
+        Timer = {
+          OnCalendar = "*-*-* 0/4:00:00";
+          Persistent = true;
+        };
+
+        Install = {
+          WantedBy = [ "default.target" ];
+        };
+      };
+    };
+  };
+}

modules/services/unison.nix

@@ -0,0 +1,42 @@
+# When enabled, this will periodically backup your stuff as configured in '$UNISON/default.prf' (or not with the 'flags' option).
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.modules.services.unison;
+in
+{
+  options.modules.services.unison = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+    };
+
+    flags = mkOption {
+      type = types.str;
+      default = "";
+    };
+  };
+
+  config = mkIf cfg.enable {
+    my.home = {
+      systemd.user.services.unison = {
+        Unit = {
+          Description = "Unison backup";
+          Documentation = [ "https://www.cis.upenn.edu/~bcpierce/unison/docs.html" ];
+        };
+
+        Service = {
+          ExecStart = "${(pkgs.unison.override { enableX11 = false; })}/bin/unison ${cfg.flags}";
+          Environment = [ "UNISON=\"$XDG_DATA_HOME/unison\"" ];
+          RestartSec = "5mins";
+        };
+
+        Install = {
+          WantedBy = [ "default.target" ];
+        };
+      };
+    };
+  };
+}

modules/shell/base.nix

@@ -11,22 +11,26 @@ with lib;
   };
 
   config = mkIf config.modules.shell.base.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
-      aspell        # Want to check spelling on the command-line?
+      aspell        # Hunt down a spelling bee champion to come to your shell.
       bat           # cat(1) with wings.
       buku          # A developer-oriented browser-independent bookmark manager.
       exa           # ls(1) after an exodus.
-      fd            # find(1) after a cognitive behavioral therpay.
+      fd            # find(1) after a cognitive behavioral therapy.
-      fzf           # A fuzzy finder, not furry finder which is a common misconception.
+      fzf           # A fuzzy finder that enables fuzzy finding not furry finding, a common misconception.
-      hexyl         # Binary viewer on the command-line.
+      hexyl         # Binary viewer with a cool name on the command-line.
+      hledger       # Do your accountancy thing ON THE COMMAND LINE, sure why not!
+      httpie        # Want a piece of the HTTP pie.
       gopass        # The improved version of Password Store which is a password manager for hipsters.
-      maim          # A command-line interface for screenshots.
+      maim          # A command-line interface for parsing screenshots.
       jq            # A command-line interface for parsing JSON.
       pup           # A command-line interface for parsing HTML.
-      ripgrep       # Super-fast full-text searcher.
+      (ripgrep.override { withPCRE2 = true; })       # Super-fast full-text searcher.
+      (recoll.override { withGui = false; })          # Bring the search engine to the desktop!
       sqlite        # Battle-tested cute little database that can grow into an abomination of a data spaghetti.
       tree          # I'm not a scammer, I swear.
-      youtube-dl    # A command-line interface for downloading videos.
+      unzip         # Unzip what? The world may never know.
+      youtube-dl    # A program that can be sued for false advertisement as you can download from other video sources.
     ];
   };
 }

modules/shell/git.nix

@@ -10,12 +10,13 @@ with lib;
       type = types.bool;
       default = false;
     };
+
+    config = mkOption {
+      type = types.submodule;
+    };
   };
 
   config = mkIf config.modules.shell.git.enable {
-    home.packages = with pkgs; [
+    modules.shell.git.config = mkAliasDefinitions options.programs.git;
-      gitAndTools.delta
-      gitAndTools.diff-so-fancy
-    ];
   };
 }

modules/shell/lf.nix

@@ -12,11 +12,11 @@ with lib;
   };
 
   config = mkIf config.modules.shell.lf.enable {
-    home.packages = with pkgs; [
+    my.packages = with pkgs; [
       lf
     ];
 
-    xdg.configFile."lf" = {
+    my.home.xdg.configFile."lf" = {
       source = ../../config/lf;
       recursive = true;
     };

modules/shell/zsh.nix

@@ -15,9 +15,26 @@ with lib;
     programs.zsh = {
       enable = true;
       enableCompletion = true;
-      enableAutosuggestions = true;
+      autosuggestions.enable = true;
-      dotDir = "${config.xdg.configHome}";
+      histFile = "\$XDG_DATA_HOME/zsh/history";
-      history.path = "${config.xdg.dataHome}/zsh/history";
+      loginShellInit = "
+        export ZDOTDIR=\"\$XDG_CONFIG_HOME/zsh\"
+      ";
+
+      # Adding basic version control support to the zsh prompt. 
+      # https://git-scm.com/book/en/v2/Appendix-A%3A-Git-in-Other-Environments-Git-in-Zsh
+      promptInit = "
+        autoload -Uz vcs_info
+        precmd_vcs_info() { vcs_info }
+        precmd_functions+=( precmd_vcs_info )
+        setopt prompt_subst
+        zstyle ':vcs_info:*' formats '[%s] (%b)'
+        autoload -U colors && colors
+        PROMPT=\"%F%{\${fg[white]}%}%(0?.√.%?) %B%{\$fg[magenta]%}%1~%{\$reset_color%} \$vcs_info_msg_0_ $%f%b \"
+        RPROMPT=\"[%D %*]\"
+      ";
+
+      syntaxHighlighting.enable = true;
     };
   };
 }

modules/themes/default.nix

@@ -0,0 +1,40 @@
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+
+let
+  cfg = config.modules.themes;
+in
+{
+  imports = [
+    ./fair-and-square
+  ];
+
+  options.modules.themes = {
+    name = mkOption {
+      type = with types; nullOr str;
+      default = null;
+    };
+
+    version = mkOption {
+      type = with types; nullOr str;
+      default = null;
+    };
+
+    path = mkOption {
+      type = with types; nullOr path;
+      default = null;
+    };
+
+    wallpaper = mkOption {
+      type = with types; nullOr path;
+      default = if cfg.path != null
+                then "${cfg.path}/config/wallpaper"
+		else null;
+    };
+  };
+
+  config = mkIf (cfg.path != null && builtins.pathExists cfg.wallpaper) {
+    my.home.home.file.".background-image".source = cfg.wallpaper;
+  };
+}

modules/themes/fair-and-square/README.adoc

@@ -0,0 +1,19 @@
+= Fair and square
+
+A theme featuring fairly simple graphics with not much bells and whistles.
+Thus, it focuses on snapiness and efficient use of keyboard shortcuts.
+Intended to be used for potatoes (READ: cheap low-end computers) like mine.
+
+This theme is mainly composed of the following components:
+
+- bspwm as the window manager
+- polybar for the bars
+- rofi for the application laucher and the generic interface
+- dunst (and libnotify) for desktop notifications
+- Arc is the chosen GTK theme
+
+Other miscellaneous stuff:
+
+- sxhkd (since you're using bspwm, anyways)
+- feh (for setting the background)
+

modules/themes/fair-and-square/config/alacritty/alacritty.yml

@@ -0,0 +1,465 @@
+# Configuration for Alacritty, the GPU enhanced terminal emulator.
+
+window:
+  # Window dimensions (changes require restart)
+  #
+  # Specified in number of columns/lines, not pixels.
+  # If both are `0`, this setting is ignored.
+  dimensions:
+    columns: 0
+    lines: 0
+
+  # Window position (changes require restart)
+  #
+  # Specified in number of pixels.
+  # If the position is not set, the window manager will handle the placement.
+  #position:
+  #  x: 0
+  #  y: 0
+
+  # Window padding (changes require restart)
+  #
+  # Blank space added around the window in pixels. This padding is scaled
+  # by DPI and the specified value is always added at both opposing sides.
+  padding:
+    x: 0
+    y: 0
+
+  # Spread additional padding evenly around the terminal content.
+  dynamic_padding: false
+
+  # Window decorations
+  #
+  # Values for `decorations`:
+  #     - full: Borders and title bar
+  #     - none: Neither borders nor title bar
+  #
+  # Values for `decorations` (macOS only):
+  #     - transparent: Title bar, transparent background and title bar buttons
+  #     - buttonless: Title bar, transparent background, but no title bar buttons
+  decorations: full
+
+  # Startup Mode (changes require restart)
+  #
+  # Values for `startup_mode`:
+  #   - Windowed
+  #   - Maximized
+  #   - Fullscreen
+  #
+  # Values for `startup_mode` (macOS only):
+  #   - SimpleFullscreen
+  startup_mode: Windowed
+
+  # Allow terminal applications to change Alacritty's window title.
+  dynamic_title: true
+
+
+colors:
+  primary:
+    background: "#2E3440"
+    foreground: "#D8DEE9"
+
+  normal:
+    black: "#3B4252"
+    red: "#BF616A"
+    green: "#A3BE8C"
+    yellow: "#EBCB8B"
+    blue: "#81A1C1"
+    magenta: "#B48EAD"
+    cyan: "#88C0D0"
+    white: "#E5E9F0"
+
+  bright:
+    black: "#727B8A"
+    red: "#BF616A"
+    green: "#A3BE8C"
+    yellow: "#EBCB8B"
+    blue: "#81A1C1"
+    magenta: "#B48EAD"
+    cyan: "#8FBCBB"
+    white: "#ECEFF4"
+
+
+scrolling:
+  # Maximum number of lines in the scrollback buffer.
+  # Specifying '0' will disable scrolling.
+  history: 10000
+
+  # Number of lines the viewport will move for every line scrolled when
+  # scroll back is enabled (history > 0).
+  multiplier: 3
+
+
+# Font configuration (changes require restart)
+font:
+  normal: 
+    family: monospace
+    family: Iosevka
+
+  # Point size
+  size: 13.0
+
+  # Offset is the extra space around each character. `offset.y` can be thought of
+  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
+  offset:
+    x: 0
+    y: 0
+
+  # Glyph offset determines the locations of the glyphs within their cells with
+  # the default being at the bottom. Increasing `x` moves the glyph to the right,
+  # increasing `y` moves the glyph upwards.
+  glyph_offset:
+    x: 0
+    y: 0
+
+  # Thin stroke font rendering (macOS only)
+  #
+  # Thin strokes are suitable for retina displays, but for non-retina screens
+  # it is recommended to set `use_thin_strokes` to `false`
+  #
+  # macOS >= 10.14.x:
+  #
+  # If the font quality on non-retina display looks bad then set
+  # `use_thin_strokes` to `true` and enable font smoothing by running the
+  # following command:
+  #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
+  #
+  # This is a global setting and will require a log out or restart to take
+  # effect.
+  use_thin_strokes: true
+
+# If `true`, bold text is drawn using the bright color variants.
+draw_bold_text_with_bright_colors: true
+
+# Visual Bell
+#
+# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
+# rung, the terminal background will be set to white and transition back to the
+# default background color. You can control the rate of this transition by
+# setting the `duration` property (represented in milliseconds). You can also
+# configure the transition function by setting the `animation` property.
+#
+# Values for `animation`:
+#   - Ease
+#   - EaseOut
+#   - EaseOutSine
+#   - EaseOutQuad
+#   - EaseOutCubic
+#   - EaseOutQuart
+#   - EaseOutQuint
+#   - EaseOutExpo
+#   - EaseOutCirc
+#   - Linear
+#
+# Specifying a `duration` of `0` will disable the visual bell.
+bell:
+  animation: EaseOutExpo
+  duration: 0
+  color: '0xffffff'
+
+# Background opacity
+#
+# Window opacity as a floating point number from `0.0` to `1.0`.
+# The value `0.0` is completely transparent and `1.0` is opaque.
+background_opacity: 1
+
+# Mouse bindings
+#
+# Available fields:
+#   - mouse
+#   - action
+#   - mods (optional)
+#
+# Values for `mouse`:
+#   - Middle
+#   - Left
+#   - Right
+#   - Numeric identifier such as `5`
+#
+# All available `mods` and `action` values are documented in the key binding
+# section.
+mouse_bindings:
+  - { mouse: Middle, action: PasteSelection }
+
+mouse:
+  # Click settings
+  #
+  # The `double_click` and `triple_click` settings control the time
+  # alacritty should wait for accepting multiple clicks as one double
+  # or triple click.
+  double_click: { threshold: 300 }
+  triple_click: { threshold: 300 }
+
+  # If this is `true`, the cursor is temporarily hidden when typing.
+  hide_when_typing: false
+
+  url:
+    modifiers: None
+
+
+
+selection:
+  semantic_escape_chars: ",│`|:\"' ()[]{}<>"
+
+  # When set to `true`, selected text will be copied to the primary clipboard.
+  save_to_clipboard: false
+
+
+cursor:
+  # Cursor style
+  #
+  # Values for `style`:
+  #   - ▇ Block
+  #   - _ Underline
+  #   - | Beam
+  style: Block
+
+  # If this is `true`, the cursor will be rendered as a hollow box when the
+  # window is not focused.
+  unfocused_hollow: true
+
+
+# Live config reload (changes require restart)
+live_config_reload: true
+
+
+# Windows 10 ConPTY backend (Windows only)
+#
+# This will enable better color support and may resolve other issues,
+# however this API and its implementation is still young and so is
+# disabled by default, as stability may not be as good as the winpty
+# backend.
+#
+# Alacritty will fall back to the WinPTY automatically if the ConPTY
+# backend cannot be initialized.
+enable_experimental_conpty_backend: false
+
+
+# Send ESC (\x1b) before characters when alt is pressed.
+alt_send_esc: true
+
+
+debug:
+  # Display the time it takes to redraw each frame.
+  render_timer: false
+
+  # Keep the log file after quitting Alacritty.
+  persistent_logging: false
+
+  # Log level
+  #
+  # Values for `log_level`:
+  #   - None
+  #   - Error
+  #   - Warn
+  #   - Info
+  #   - Debug
+  #   - Trace
+  log_level: Warn
+
+  # Print all received window events.
+  print_events: false
+
+  # Record all characters and escape sequences as test data.
+  ref_test: false
+
+
+# Key bindings
+#
+# Key bindings are specified as a list of objects. Each binding will specify a
+# key and modifiers required to trigger it, terminal modes where the binding is
+# applicable, and what should be done when the key binding fires. It can either
+# send a byte sequence to the running application (`chars`), execute a
+# predefined action (`action`) or fork and execute a specified command plus
+# arguments (`command`).
+#
+# Bindings are always filled by default, but will be replaced when a new binding
+# with the same triggers is defined. To unset a default binding, it can be
+# mapped to the `None` action.
+#
+# Example:
+#   `- { key: V, mods: Control|Shift, action: Paste }`
+#
+# Available fields:
+#   - key
+#   - mods (optional)
+#   - chars | action | command (exactly one required)
+#   - mode (optional)
+#
+# Values for `key`:
+#   - `A` -> `Z`
+#   - `F1` -> `F12`
+#   - `Key1` -> `Key0`
+#
+#   A full list with available key codes can be found here:
+#   https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants
+#
+#   Instead of using the name of the keys, the `key` field also supports using
+#   the scancode of the desired key. Scancodes have to be specified as a
+#   decimal number.
+#   This command will allow you to display the hex scancodes for certain keys:
+#     `showkey --scancodes`
+#
+# Values for `mods`:
+#   - Command
+#   - Control
+#   - Option
+#   - Super
+#   - Shift
+#   - Alt
+#
+#   Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`.
+#   Whitespace and capitalization is relevant and must match the example.
+#
+# Values for `chars`:
+#   The `chars` field writes the specified string to the terminal. This makes
+#   it possible to pass escape sequences.
+#   To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run
+#   the command `showkey -a` outside of tmux.
+#   Note that applications use terminfo to map escape sequences back to
+#   keys. It is therefore required to update the terminfo when
+#   changing an escape sequence.
+#
+# Values for `action`:
+#   - Paste
+#   - PasteSelection
+#   - Copy
+#   - IncreaseFontSize
+#   - DecreaseFontSize
+#   - ResetFontSize
+#   - ScrollPageUp
+#   - ScrollPageDown
+#   - ScrollLineUp
+#   - ScrollLineDown
+#   - ScrollToTop
+#   - ScrollToBottom
+#   - ClearHistory
+#   - Hide
+#   - Quit
+#   - ClearLogNotice
+#   - SpawnNewInstance
+#   - ToggleFullscreen
+#   - None
+#
+# Values for `action` (macOS only):
+#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
+#
+# Values for `command`:
+#   The `command` field must be a map containing a `program` string and
+#   an `args` array of command line parameter strings.
+#
+#   Example:
+#       `command: { program: "alacritty", args: ["-e", "vttest"] }`
+#
+# Values for `mode`:
+#   - ~AppCursor
+#   - AppCursor
+#   - ~AppKeypad
+#   - AppKeypad
+key_bindings:
+  - { key: Paste,                   action: Paste                            }
+  - { key: Copy,                    action: Copy                             }
+  - { key: L,        mods: Control, action: ClearLogNotice                   }
+  - { key: L,        mods: Control, chars: "\x0c"                            }
+  - { key: Home,     mods: Alt,     chars: "\x1b[1;3H"                       }
+  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
+  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
+  - { key: End,      mods: Alt,     chars: "\x1b[1;3F"                       }
+  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
+  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
+  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
+  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
+  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
+  - { key: PageUp,   mods: Alt,     chars: "\x1b[5;3~"                       }
+  - { key: PageUp,                  chars: "\x1b[5~"                         }
+  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
+  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
+  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
+  - { key: PageDown, mods: Alt,     chars: "\x1b[6;3~"                       }
+  - { key: PageDown,                chars: "\x1b[6~"                         }
+  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
+  - { key: Back,                    chars: "\x7f"                            }
+  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
+  - { key: Insert,                  chars: "\x1b[2~"                         }
+  - { key: Delete,                  chars: "\x1b[3~"                         }
+  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
+  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
+  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
+  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
+  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
+  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
+  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
+  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
+  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
+  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
+  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
+  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
+  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
+  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
+  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
+  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
+  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
+  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
+  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
+  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
+  - { key: F1,                      chars: "\x1bOP"                          }
+  - { key: F2,                      chars: "\x1bOQ"                          }
+  - { key: F3,                      chars: "\x1bOR"                          }
+  - { key: F4,                      chars: "\x1bOS"                          }
+  - { key: F5,                      chars: "\x1b[15~"                        }
+  - { key: F6,                      chars: "\x1b[17~"                        }
+  - { key: F7,                      chars: "\x1b[18~"                        }
+  - { key: F8,                      chars: "\x1b[19~"                        }
+  - { key: F9,                      chars: "\x1b[20~"                        }
+  - { key: F10,                     chars: "\x1b[21~"                        }
+  - { key: F11,                     chars: "\x1b[23~"                        }
+  - { key: F12,                     chars: "\x1b[24~"                        }
+  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
+  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
+  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
+  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
+  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
+  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
+  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
+  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
+  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
+  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
+  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
+  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
+  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
+  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
+  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
+  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
+  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
+  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
+  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
+  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
+  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
+  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
+  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
+  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
+  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
+  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
+  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
+  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
+  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
+  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
+  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
+  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
+  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
+  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
+  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
+  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
+  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
+  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
+  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
+  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
+  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
+  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
+  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
+  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
+  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
+  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
+  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
+  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
+  - { key: NumpadEnter,             chars: "\n"                              }

modules/themes/fair-and-square/config/bspwm/bspwmrc

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Starting all of the required programs.
+pkill polybar || polybar "fds-bar" &
+pkill feh || feh $HOME/.background-image
+
+# Removing all rules at startup to prevent duplicating rules. 
+bspc rule -r "*"
+
+# Set up the desktops (workspaces) for the monitor
+bspc monitor -d I II III IV V 
+
+bspc config border_width        2
+bspc config window_gap          9
+
+bspc config split_ratio         0.50
+bspc config borderless_monocle  true
+bspc config gapless_monocle     true
+bspc config focused_border_color "#88C0D0"
+bspc config focus_follows_pointer true
+
+# Set the default cursor to pointer
+xsetroot -cursor_name left_ptr
+
+# Rules
+bspc rule -a code-oss desktop=^2
+bspc rule -a firefox desktop=^1
+

modules/themes/fair-and-square/config/dunst/dunstrc

@@ -0,0 +1,432 @@
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = mouse
+
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    geometry = "350x50-10+50"
+
+    # Show how many messages are currently hidden (because of geometry).
+    indicate_hidden = yes
+
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.).
+    transparency = 10
+
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 2
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#D8DEE9"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+
+
+    ### Text ###
+    font = Iosevka 12
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%s</b>\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+
+
+    ### Icons ###
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 32
+
+    # Paths to default icons.
+    icon_path = /usr/share/icons/Adwaita/16x16/status/:/usr/share/icons/Adwaita/16x16/devices/
+
+
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/firefox -new-tab
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = false
+
+    # Manage dunst's desire for talking
+    # Can be one of the following values:
+    #  crit: Critical features. Dunst aborts
+    #  warn: Only non-fatal warnings
+    #  mesg: Important Messages
+    #  info: all unimportant stuff
+    # debug: all less than unimportant stuff
+    verbosity = mesg
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 0
+
+
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines action of mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: If the notification has exactly one action, or one is marked as default,
+    #              invoke it. If there are multiple and no default, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    mouse_left_click = close_current
+    mouse_middle_click = do_action
+    mouse_right_click = close_all
+
+
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+
+
+[shortcuts]
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification.
+    close = ctrl+space
+
+    # Close all notifications.
+    close_all = ctrl+shift+space
+
+    # Redisplay last message(s).
+    # On the US keyboard layout "grave" is normally above TAB and left
+    # of "1". Make sure this key actually exists on your keyboard layout,
+    # e.g. check output of 'xmodmap -pke'
+    history = ctrl+grave
+
+    # Context menu.
+    context = ctrl+shift+period
+
+
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#2E3440"
+    foreground = "#ECEFF4"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #icon = /path/to/icon
+
+
+
+[urgency_normal]
+    background = "#2E3440"
+    foreground = "#D8DEE9"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #icon = /path/to/icon
+
+
+
+[urgency_critical]
+    background = "#2E3440"
+    foreground = "#A3BE8C"
+    frame_color = "#A3BE8C"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #icon = /path/to/icon
+
+
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    timeout
+#    urgency
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    format = ""
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+
+# vim: ft=cfg

modules/themes/fair-and-square/config/polybar/config

@@ -0,0 +1,188 @@
+; Main color format is in ARGB.
+; However, formats in RGB is fine.
+; This is where all of the colors should be placed for those who are lazy to scroll down (like me).
+[colors]
+    background = "#2E3440"
+    background-light = "#727B8A"
+    foreground = "#D8DEE9"
+    foreground-light = "#ECEFF4"
+    accent = "#88C0D0"
+
+
+; The common style between bars.
+[bar-common-style]
+    width = 100%
+    height = 32
+    wm-restack = bspwm
+    fixed-center = false
+
+    line-size = 3
+    line-color = #f00
+
+    padding = 1
+
+    module-margin = 1
+    module-padding = 1
+
+    font-0 = "Iosevka;2"
+    font-1 = "Fira Code;2"
+
+    ; Our fallback fonts are mostly used as icon fonts.
+    ; For future references, the version of Font Awesome used here is at v5.13.0.
+    ; I also installed the font myself that I downloaded from the official website (https://fontawesome.com/).
+    font-2 = "Font Awesome 5 Free,Font Awesome 5 Free Solid:style=Solid;2"
+
+    ; This creates the illusion as if the modules are in the center.
+    __border-size = 5
+    border-top-size = ${self.__border-size}
+    border-top-color = ${colors.background}
+    border-bottom-size = ${self.__border-size}
+    border-bottom-color = ${colors.background}
+
+    tray-position = right
+    tray-padding = 1
+    cursor-click = pointer
+
+
+; Common style between modules.
+[module-common-style]
+    label-padding = 1
+
+
+; The main bar.
+[bar/fds-bar]
+    background = ${colors.background}
+    foreground = ${colors.foreground}
+
+    inherit = bar-common-style
+    enable-ipc = true
+
+    modules-left = bspwm
+    modules-center = date
+    modules-right = pulseaudio eth memory home-fs root-fs
+
+
+[module/home-fs]
+    type = internal/fs
+    mount-0 = /home
+    format-margin = 0
+    format-padding = 0
+    label-margin = 0
+    label-padding = 0
+
+    format-mounted-prefix = ""
+    format-mounted-prefix-margin-right = 1
+    format-unmounted-prefix = ""
+    format-unmounted-prefix-margin-right = 1
+    label-mounted = %free%
+    label-unmounted = N/A
+
+
+[module/root-fs]
+    type = internal/fs
+    mount-0 = /
+    format-mounted-prefix = ""
+    format-mounted-prefix-margin-right = 1
+    format-unmounted-prefix = ""
+    format-unmounted-prefix-margin-right = 1
+    label-mounted = %free%
+    label-unmounted = N/A
+
+
+[module/bspwm]
+    type = internal/bspwm
+    wrapping-scroll = false
+    pin-workspaces = true
+    label-focused = %index%
+    label-focused-background = ${colors.accent}
+    label-focused-foreground = ${colors.background}
+    label-focused-padding = 1
+
+    label-occupied = %index%
+    label-occupied-padding = 1
+
+    label-urgent = %index%!
+    label-urgent-background = ${colors.foreground}
+    label-urgent-padding = 1
+
+    label-empty = %index%
+    label-empty-foreground = ${colors.foreground-light}
+    label-empty-padding = 1
+
+
+[module/memory]
+    inherit = module-common-style
+    type = internal/memory
+    interval = 2
+    format-prefix = ""
+    label = %gb_used%
+
+
+[module/wlan]
+    inherit = module-common-style
+    type = internal/network
+    interface = wlp0s18f2u4
+    interval = 3.0
+
+    format-connected = <label-connected>
+    format-connected-underline = #9f78e1
+    format-prefix = "NET"
+    label-connected = %essid%
+
+    format-disconnected = <label-disconnected>
+    label-disconnected = disconnected
+
+
+[module/eth]
+    type = internal/network
+    interface = enp4s0
+    interval = 3
+
+    format-connected-prefix = ""
+    label-connected = "OK"
+    label-connected-padding = 1
+
+    format-disconnected-prefix = ""
+    label-disconnected-padding = 1
+    label-disconnected = "N/A"
+
+
+[module/date]
+    inherit = module-common-style
+    type = internal/date
+    interval = 5
+
+    ; We've formatted the time string to alter between the time and the date instead.
+    ; Although, I feel it's a hacky workaround, it still is functional as a date module.
+    date = "%A, %F"
+    date-alt = "%B %d, %Y"
+    time = %T
+    time-alt = %F
+
+    format-prefix = ""
+    label = %date% %time%
+
+
+[module/pulseaudio]
+    inherit = module-common-style
+    type = internal/pulseaudio
+
+    format-volume-prefix = ""
+    format-volume = <label-volume>
+    label-volume = %percentage%%
+    label-volume-padding = 1
+
+    format-muted-prefix = ""
+    label-muted = muted
+    label-muted-padding = 1
+
+
+[settings]
+    screenchange-reload = true
+
+
+[global/wm]
+    margin = 1
+    padding = 1
+
+; vim:ft=dosini

modules/themes/fair-and-square/config/rofi/config.rasi

@@ -0,0 +1,9 @@
+configuration {
+    display-drun: "Application";
+    display-run: "Execute";
+    display-window: "Window";
+    display-ssh: "SSH";
+    font: "Iosevka 12";
+    show-icons: true;
+    theme: "themes/fds-mini-sidebar";
+}

modules/themes/fair-and-square/config/rofi/themes/dmenu.rasi

@@ -0,0 +1,66 @@
+/**
+ * ROFI Color theme
+ * User: Qball
+ * Copyright: Dave Davenport
+ * Modified by: Gabriel Arazas (foo-dogsquared)
+ */
+
+* {
+    /* The color swatch */
+    /* Useful for quick editing of the colors */
+    background: #2E3440;
+    foreground: #D8DEE9;
+    color0: #3B4252;
+    color1: #BF616A;
+    color2: #A3BE8C;
+    color3: #EBCB8B;
+    color4: #81A1C1;
+    color5: #B48EAD;
+    color6: #88C0D0;
+    color7: #E5E9F0;
+    color8: #727B8A;
+    color9: #BF616A;
+    color10: #A3BE8C;
+    color11: #EBCB8B;
+    color12: #81A1C1;
+    color13: #B48EAD;
+    color14: #8FBCBB;
+    color15: #ECEFF4;
+
+    background-color:      @background;
+    border-color:          @foreground;
+    text-color:           @foreground;
+    font:            "Iosevka 12";
+}
+
+window {
+    anchor:     north;
+    location:   north;
+    width:      100%;
+    padding:    7px;
+    children:   [ horibox ];
+}
+
+horibox {
+    orientation: horizontal;
+    children:   [ prompt, entry, listview ];
+}
+
+listview {
+    layout:     horizontal;
+    spacing:    5px;
+    lines:      100;
+}
+
+entry {
+    expand:     false;
+    width:      10em;
+}
+
+element {
+    padding: 0px 2px;
+}
+
+element.selected {
+    background-color: @color6;
+}

modules/themes/fair-and-square/config/rofi/themes/fds-center-menu.rasi

@@ -0,0 +1,93 @@
+* {
+    /* The color configuration */
+    /* Useful for quick editing in case for compiled templates */
+    background: #2E3440;
+    foreground: #D8DEE9;
+    color0: #3B4252;
+    color1: #BF616A;
+    color2: #A3BE8C;
+    color3: #EBCB8B;
+    color4: #81A1C1;
+    color5: #B48EAD;
+    color6: #88C0D0;
+    color7: #E5E9F0;
+    color8: #727B8A;
+    color9: #BF616A;
+    color10: #A3BE8C;
+    color11: #EBCB8B;
+    color12: #81A1C1;
+    color13: #B48EAD;
+    color14: #8FBCBB;
+    color15: #ECEFF4;
+
+    /* Theme settings */
+    highlight: bold italic;
+    scrollbar: true;
+
+    /* Style */
+    text-color: @foreground;
+    background-color: @background;
+    font: "Font Awesome 5 Free,Font Awesome 5 Free Solid:style=Solid 14";
+    font: "Iosevka 12";
+}
+
+window {
+    background-color: transparent;
+
+    height: 65%;
+    width: 45%;
+    position: center;
+    location: center;
+    text-color: @foreground;
+}
+
+mainbox {
+    background-color: @background;
+    border: 2;
+    border-color: @color6;
+    children: [ inputbar, listview, mode-switcher ];
+}
+
+inputbar,
+listview {
+    background: @background;
+}
+
+inputbar {
+    orientation: vertical;
+    children: [ prompt, entry ];
+    background-color: @color0;
+}
+
+entry,
+prompt {
+    background-color: @color0;
+}
+
+listview {
+    cyclic: true;
+}
+
+element selected.normal {
+    background-color: @color6;
+    text-color: @background;
+}
+
+scrollbar {
+    background-color: @color0;
+    handle-color: @color6;
+    handle-width: 10px;
+    height: 100%;
+}
+
+button,
+case-indicator,
+inputbar,
+element {
+    padding: 5;
+}
+
+button.selected {
+    background-color: @color6;
+    text-color: @background;
+}

modules/themes/fair-and-square/config/rofi/themes/fds-mini-sidebar.rasi

@@ -0,0 +1,122 @@
+* {
+    /* The color configuration */
+    /* Useful for quick editing in case for compiled templates */
+    background: #2E3440;
+    foreground: #D8DEE9;
+    color0: #3B4252;
+    color1: #BF616A;
+    color2: #A3BE8C;
+    color3: #EBCB8B;
+    color4: #81A1C1;
+    color5: #B48EAD;
+    color6: #88C0D0;
+    color7: #E5E9F0;
+    color8: #727B8A;
+    color9: #BF616A;
+    color10: #A3BE8C;
+    color11: #EBCB8B;
+    color12: #81A1C1;
+    color13: #B48EAD;
+    color14: #8FBCBB;
+    color15: #ECEFF4;
+
+    /* General theme settings */
+    highlight: bold italic;
+    scrollbar: true;
+
+    /* Font settings */
+    text-color: @foreground;
+    background-color: @background;
+    font: "Font Awesome 5 Free,Font Awesome 5 Free Solid:style=Solid 14";
+    font: "Iosevka 12";
+
+}
+
+window {
+    background-color: transparent;
+
+    height: 65%;
+    width: 35%;
+    position: southwest;
+    location: southwest;
+    text-color: @foreground;
+}
+
+mainbox {
+    background-color: @background;
+    border: 2;
+    border-color: @color6;
+    children: [ inputbar, listview, mode-switcher ];
+    padding: 0.5em;
+}
+
+inputbar,
+listview {
+    background: @background;
+    margin: 0 0 0.5em 0;
+}
+
+inputbar {
+    orientation: vertical;
+    children: [ prompt, entry ];
+}
+
+prompt {
+    text-style: underline;
+    width: 100%;
+}
+
+entry {
+    background-color: @color0;
+    margin: 0 1em 0 0;
+}
+
+element {
+    background-color: @color0;
+    padding: 5;
+}
+
+element selected.normal {
+    background-color: @color6;
+    text-color: @background;
+}
+
+scrollbar {
+    background-color: @color0;
+    border-radius: 30%;
+    handle-color: @color6;
+    handle-width: 15px;
+    height: 100%;
+    text-color: @background;
+    width: 10px;
+}
+
+listview {
+    cyclic: true;
+    spacing: 0.6em;
+}
+
+element, button {
+    border-radius: 30%;
+}
+
+button,
+case-indicator,
+entry,
+inputbar {
+    padding: 5;
+}
+
+sidebar {
+    padding: 5;
+    margin: 5;
+}
+
+button {
+    margin: 0.25em;
+}
+
+button.selected {
+    background-color: @color6;
+    text-color: @background;
+}

modules/themes/fair-and-square/default.nix

@@ -0,0 +1,114 @@
+{ config, options, lib, pkgs, ... }:
+
+with lib;
+{
+  options.modules.themes."fair-and-square" = {
+    enable = mkOption {
+      type = types.bool;
+      default = false;
+    };
+  };
+
+  config = mkIf config.modules.themes."fair-and-square".enable {
+    # Pass the metadata of the theme.
+    modules.themes = {
+      name = "Fair and square";
+      version = "0.1.0";
+      path = ./.;
+    };
+
+    # Enable picom compositor.
+    services = {
+      picom = {
+        enable = true;
+        fade = false;
+        shadow = false;
+      };
+
+      xserver = {
+        displayManager = {
+          lightdm.enable = true;
+          lightdm.greeters.mini.enable = true;
+          lightdm.greeters.mini.user = config.my.username;
+          defaultSession = "none+bspwm";
+        };
+        enable = true;
+        libinput.enable = true;
+        windowManager.bspwm.enable = true;
+      };
+    };
+
+    my.env.TERMINAL = "alacritty";
+
+    my.home = {
+      # Enable GTK configuration.
+      gtk.enable = true;
+
+      # Enable QT configuration.
+      qt.enable = true;
+      qt.platformTheme = "gtk";
+
+      # Install all of the configurations in the XDG config home.
+      xdg.configFile = mkMerge [
+        (let recursiveXdgConfig = name: {
+          source = ./config + "/${name}";
+          recursive = true;
+        }; in {
+          "alacritty" = recursiveXdgConfig "alacritty";
+          "bspwm" = recursiveXdgConfig "bspwm";
+          "dunst" = recursiveXdgConfig "dunst";
+          "polybar" = recursiveXdgConfig "polybar";
+          "rofi" = recursiveXdgConfig "rofi";
+
+          "sxhkd" = {
+            source = <config/sxhkd>;
+            recursive = true;
+          };
+        })
+
+        (mkIf config.services.xserver.enable {
+          "gtk-3.0/settings.ini".text = ''
+	    [Settings]
+            gtk-theme-name=Arc
+            gtk-icon-theme-name=Arc
+            gtk-fallback-icon-theme=gnome
+            gtk-application-prefer-dark-theme=true
+            gtk-cursor-theme-name=Adwaita
+            gtk-xft-hinting=1
+            gtk-xft-hintstyle=hintfull
+            gtk-xft-rgba=none
+          '';
+
+          "gtk-2.0/gtkrc".text = ''
+            gtk-theme-name="Arc"
+            gtk-icon-theme-name="Arc"
+            gtk-font-name="Sans 10"
+            gtk-cursor-theme-name="Adwaita"
+          '';
+        })
+      ];
+    };
+
+    my.packages = with pkgs; [
+      alacritty         # Muh GPU-accelerated terminal emulator.
+      dunst             # Add more annoying pop-ups on your screen!
+      feh               # Meh, it's a image viewer that can set desktop background, what gives?
+      gnome3.adwaita-icon-theme
+      libnotify         # Library for yer notifications.
+      (polybar.override {
+        pulseSupport = true;
+        nlSupport = true;
+      })                # Add some bars to your magnum opus.
+      rofi              # A ricer's best friend (one of them at least).
+
+      # The Arc theme
+      arc-icon-theme
+      arc-theme
+    ];
+
+    fonts.fonts = with pkgs; [
+      iosevka
+      font-awesome-ttf
+    ];
+  };
+}

packages/default.nix

@@ -0,0 +1,7 @@
+[
+  (self: super: with super; {
+    # defold = (callPackage ./defold.nix {});
+  })
+
+  (import (builtins.fetchTarball https://github.com/nix-community/emacs-overlay/archive/master.tar.gz))
+]

packages/defold.nix

@@ -0,0 +1,51 @@
+# https://defold.com/open/
+# It'sa game engine for cross-platform development.
+{ stdenv, fetchFromGitHub,
+autoconf,
+automake,
+cmake,
+curl,
+freeglut,
+git,
+jdk11,
+libtool,
+libuuid,
+mesa_glu,
+openalSoft,
+python2,
+rpm,
+valgrind,
+waf,
+xorgproto,
+libXi,
+libXext,
+}:
+
+stdenv.mkDerivation rec {
+  pname = "defold";
+  version = "1.2.171";
+
+  src = fetchFromGitHub {
+    owner = "defold";
+    repo = "defold";
+    rev = "v1.2.171";
+    sha256 = "1anpwxgai1qk6c97zslfvj5b6s66fyk459cfnxnqm7d8sq9d0qg2";
+  };
+
+  buildPhase = ''
+    ./scripts/build.py shell --platform=${stdenv.system}
+    ./scripts/build.py install_ext --platform=${stdenv.system}
+    ./scripts/build.py build_engine --platform=${stdenv.system}
+  '';
+
+  enableParallelBuilding = true;
+  doCheck = true;
+
+  meta = with stdenv.lib; {
+    description = "A free and open-source game engine for cross-platform development.";
+    homepage = "https://defold.com/";
+    license = licenses.free;
+    maintainers = [ maintainers.foo-dogsquared ];
+    platforms = [ "i686-linux" "x86_64-linux" ];
+  };
+}