{ config, lib, ... }: let hostCfg = config.hosts.plover; cfg = hostCfg.services.networking; # This is just referring to the same interface just with alternative names. mainEthernetInterfaceNames = [ "eth0" "enp1s0" ]; internalEthernetInterfaceNames = [ "enp7s0" ]; inherit (config.state.network) interfaces; in { options.hosts.plover.services.networking.enable = lib.mkEnableOption "preferred networking setup"; config = lib.mkIf cfg.enable { networking = { enableIPv6 = true; usePredictableInterfaceNames = lib.mkDefault true; useNetworkd = true; # We're using networkd to configure so we're disabling this # service. useDHCP = false; dhcpcd.enable = false; # We'll make use of their timeservers. timeServers = lib.mkBefore [ "ntp1.hetzner.de" "ntp2.hetzner.com" "ntp3.hetzner.net" ]; }; # The local DNS resolver. This should be used in conjunction with an # authoritative DNS server as a forwarder. Also, it should live in its # default address at 127.0.0.53 (as of systemd v252). services.resolved = { enable = true; dnssec = "false"; }; # The interface configuration is based from the following discussion: # https://discourse.nixos.org/t/nixos-on-hetzner-cloud-servers-ipv6/221/ systemd.network = { enable = true; wait-online.ignoredInterfaces = [ "lo" ]; # For more information, you can look at Hetzner documentation from # https://docs.hetzner.com/robot/dedicated-server/ip/additional-ip-adresses/ networks = { "10-wan" = let inherit (interfaces) wan; in { matchConfig.Name = lib.concatStringsSep " " mainEthernetInterfaceNames; # Setting up IPv6. address = [ "${wan.ipv4}/32" "${wan.ipv6}/64" ]; gateway = [ wan.ipv6Gateway ]; dns = [ "185.12.64.1" "185.12.64.2" "2a01:4ff:ff00::add:2" "2a01:4ff:ff00::add:1" ] ++ lib.optionals hostCfg.services.dns-server.enable [ wan.ipv4 wan.ipv6 ]; # Setting up some other networking thingy. domains = [ config.networking.domain ]; routes = lib.singleton { Gateway = wan.ipv4Gateway; GatewayOnLink = true; }; linkConfig.RequiredForOnline = "routable"; }; # The interface for our LAN. "20-lan" = let inherit (interfaces) lan; in { matchConfig.Name = lib.concatStringsSep " " internalEthernetInterfaceNames; # Take note of the private subnets set in your Hetzner Cloud instance # (at least for IPv4 addresses).. address = [ "${lan.ipv4}/16" "${lan.ipv6}/64" ]; # Using the authoritative DNS server to enable accessing them nice # internal services with domain names. dns = [ lan.ipv4 lan.ipv6 ]; # Force our own internal domain to be used in the system. domains = [ config.networking.fqdn ]; # Use the gateway to enable resolution of external domains. gateway = [ lan.ipv4Gateway lan.ipv6Gateway ]; networkConfig.IPv6AcceptRA = true; linkConfig.RequiredForOnline = "routable"; }; }; }; }; }